DIY Stainless Steel Aisles Stairs Balustrade Kit Jaw Swage Screw Wire Rope Kit. 100% Brand new and high quality. Suitable for wire runs of up to 10 meters. Suitable for 3.2mm stainless steel wire in either 7 x 7 or 1 x 19 construction. 10 x 5mm Turnbuckle Rigging Screw Jaw/Swage.
10 x 5mm Fork Terminal. 40 x 4.535mm Screws. 20 x 5mm Turnbuckle Rigging Screw Jaw/Swage. 20 x 5mm Fork Terminal.
80 x 4.535mm Screws. 30 x 5mm Turnbuckle Rigging Screw Jaw/Swage. 30 x 5mm Fork Terminal. 120 x 4.535mm Screws. 40 x 5mm Turnbuckle Rigging Screw Jaw/Swage.
40 x 5mm Fork Terminal. 160 x 4.535mm Screws. 50 x 5mm Turnbuckle Rigging Screw Jaw/Swage. 50 x 5mm Fork Terminal. 200 x 4.535mm Screws.
Suitable Wire Structure: 7x7, 1x19;Recommended Run Length. This stainless steel cable railing hardware fittings perfect for fixing 1/8 inch (3.2mm) wire rope cable to timber and metal posts, great for outoor and indoor at any angle or flat stair's railing or horizontal, vertical, straight cable guardrail. This cable railing kit is new version-neat and easy to install, all make of T316 Stainless Steel, high resistant quality and never rust.These adjust cable railing kit is integrated design. Hydraulic crimper swage tool is required to connect the railing kit with the ss cable. Note: Please allow 1-3mm error due to manual measurement.
Our first priority is customer satisfactory. We will give you the best quality products and the best customer service. Please Contact me if you not get package after 30 days.
We are not responsible for undeliverable address. We will try our best to satisfy you! We strive to answer all emails as quickly as possible.
This item is in the category "Home, Furniture & DIY\DIY Materials\Other DIY Materials". The seller is "buildnewfuturemns" and is located in this country: GB. This item can be shipped to United Kingdom.